Showing posts with label CSAT FAQ. Show all posts
Showing posts with label CSAT FAQ. Show all posts

Sunday, March 13, 2011

Reader Comment – FAQ Numbers

I had an interesting anonymous reader comment posted to my blog from yesterday about the latest new Frequently Asked Question (FAQ) that was listed on the CFATS Knowledge Center. Anonymous took exception to my statement ; “With that low number, this was a question and answer that was planned a long time ago”. Anonymous wrote: “The numbers of the FAQs are arbitrary and they are not sequential.”

Now I can’t imagine anyone outside of the management of ISCD taking the time to make such a post, and even then I can’t think of a reason why they would want to contradict that statement. My comment was certainly not intended as a criticism; I think that any information developer that takes an honest look at their product and makes guesses in advance about what might be misunderstood or incompletely comprehended is to be congratulated. This is especially true when they provide a mechanism for answering those questions like the CSAT Help Desk.

If I were in charge of such an operation and knowing that the answers such a Help Desk might provide to the regulated community might be used to make compliance decisions, I would also want to make sure that the timely answers provided by such personnel were fully reviewed and vetted in advance. I would not want incorrect interpretations to be provided to the regulated community. My lawyers would not want that even more.

In short, the way that I have previously described the operation of the FAQ system (and was embodied in that blog post) is the way that I think that an intelligent and competent administrator would set up such a compliance assistance tool.

The FAQ List.

Since I have been writing about these FAQ questions in some detail since their inception and I am a reasonably observant person (and I have tracked and maintain copies of all of the questions and responses) I have made the following observations:

• The FAQ numbers did not start with #1; up until Friday the lowest number was #42.

• When a new CSAT program or tool is published the FAQs are updated with a number of new questions and answer and they are always in sequential numbered FAQs.

• There is almost always a variably sized gap between the previous high numbered FAQ and the first newly issued FAQ when a new program is published.

• New FAQs are frequently published in the previously described number gaps and invariably refer to topics associated with the previous FAQ in that sequence.

• Not all new FAQs on previous discussed topics are assigned numbers in those previous gaps; those that are not are typically assigned to a higher number FAQ than highest currently listed FAQ.
Now, I must make clear one thing clear, no one in ISCD has explained to me how they manage the Help Desk or their FAQ list. As I said earlier, I have been observing the operation and assuming that the management of ISCD was intelligent and conscientious. Based upon those observations and assumptions, and colored by my experience working in a variety of organizations, I deduced what I believe to be the general outline of how the FAQ system works. I have shared this deduction with my readers on a number of occasions to help raise the level of confidence that they have in the answers provided by the Help Desk and the FAQ list.

New Management

I have been nearly uniform in my praise of the personnel and the operation of the this system, with infrequent constructive comments made about oversights such as the failure to remove two of the Ag Survey questions that I mentioned in an earlier blog. And typically those oversights and very minor, inconsequential errors are corrected; as one would expect with any professional organization. And certainly not all error corrections undertaken by the Help Desk over the years have been the result of my observations.

Now, if as part of the recent changes to the organization of ISCD, there have also been significant changes to the operation of the Help Desk and the way the FAQ list is operated then I suppose I will have to observe, deduce and report on their affect on this very successful part of ISCD.

If this authoritative sounding comment was, in fact, issued anonymously by a member of the new management team (and again I can’t imagine anyone else making the effort), I accept the challenge that was perhaps inadvertently issued. I like watching little things like the infrequently issued or revised FAQ statement and trying to deduce what they tell us about the internal workings of the overall organization.

Now if I am over reacting to a simple observation by someone, like myself who has their own observations and conclusions about the ISCD CSAT FAQ list, I apologize. I just don’t think that is the case. If I am misinterpreting the submitted comment, subsequent clarification from the submitter would be appreciated.

Wednesday, September 8, 2010

Ag Survey Question – Fertilizer Composition

For the last couple of years I have tried to only look at CSAT FAQ updates on a weekly basis. The main reason for this is that the answers to most of the questions provide clarification rather than truly new information. Some times, however, a newly posted question/answer provides such insight into the CSAT process that it deserves to be covered on a more immediate basis. Such is the case with the latest addition to the FAQ list:

1691: How will I know if a fertilizer includes a COI at or above the minimum concentration listed in Appendix A? Where can I find the percent by weight of a COI in a fertilizer?

There are generally two types of agricultural chemicals that are covered in this Agriculture Survey, pesticides and fertilizers. Since pesticides are closely regulated by the Environmental Protection Agency, it is fairly easy to identify the DHS chemicals of interest (COI) that are found in any registered pesticide and the concentration of that COI in the pesticide. All of that information is required to be listed on the label and in the MSDS sheet. More over, DHS is actually able to pre-populate the survey with the COI list for most registered pesticides, requiring the Preparer only to verify the actual percentage listed on the label.

Fertilizers present a particular problem with this survey. Most fertilizers boldly report the equivalent percentage of the three common mineral nutrients, nitrogen, phosphorus, and sulfur. The actual chemicals that provide these three nutrients will vary significantly. For example nitrogen may come from anhydrous ammonia, ammonia, or ammonium nitrate; all COI. Or it may come from urea or any number of ammonium salts; none of which are COI.

The actual chemicals used in the fertilizer may not be listed on the label. This would be especially true of many organic fertilizers, particularly compost. The manufacturer may simply conduct chemical tests to measure the mineral nutrient content.

Even where the manufacturer does know what the actual chemicals are in their particular fertilizer blend, labeling and MSDS requirements may allow the manufacturer to avoid listing the actual chemicals due to the proprietary nature of the blend. Current EPA regulations allow for the manufacturer to simply list the hazards associated with the chemical blend rather than its constituent components. Unfortunately, the EPA hazard listing requirements do not match up well with the DHS COI listing requirements. This is why the response to this question includes the following statement.

“The fertilizer Material Safety Data Sheet (MSDS) may provide [emphasis added] the percent by weight of the specific material in the fertilizer.”
There are going to be some fertilizers that the Preparer is just not going to be able to tell whether or not they contain COI at concentrations above the concentration minimums listed in Appendix A. What would have been nice if DHS had included a statement in this response that reflected that possibility; something along the lines of:

“If neither the label nor the MSDS for the fertilizer provides a list of the constituent chemicals, or doesn’t provide concentrations for the chemicals that it does list, do not include that fertilizer in your responses to this Survey.”
Of course, what would have been more helpful to DHS in their data collection effort would have been to provide a method of identifying the fertilizers that did not provide enough information on their label or MSDS to complete the Survey. A requirement to list the Fertilizer name and the name of the manufacturer would probably have been sufficient.

Tuesday, September 7, 2010

CFATS Knowledge Center Update 09-03-10

Last week the folks at the DHS CSAT Help Desk added one new question to the extensive Frequently Asked Questions (FAQ) list on the CFATS Knowledge Center web site. That new questions was:

1690: In the Agriculture Survey, what is the meaning of the word “transfer” in the phrase “sell, transfer, or commercially apply”?

As is true with most of the answers on this site, there is no truly new information in the response to this question, just a brief clarifying comment. Still I think that it is worthwhile for anyone responsible for submitting CSAT information to read each of these responses; as it helps to understand the thinking of the people working at the Infrastructure Security Compliance Division (ISCD). Anyone working CFATS issues at one of the facilities being asked to submit the Agriculture Survey should certainly read the answer to this specific question.

Sunday, May 2, 2010

DHS CFATS FAQ Update 04-30-10

Last week DHS updated three of the responses on their extensive list of frequently asked questions for the CSAT Help Desk. Those three questions were:

1282 - Can you briefly explain how CSAT passwords work?
1390 - I have searched the FAQs but still need additional assistance. Where can I get additional assistance?
1435 - What is the definition of A Commercial Grade (ACG) for the purposes of CFATS?

The answer to question 1282 concerning passwords contains a small but important change. The question explains that the password ‘times out’, or become outdated after 90 days. The previous version of this answer stated that the time out period was 60 days. This change will significantly reduce the number of times that a CSAT user will have to change their password.

Unfortunately, my records do not contain a copy of the previous version of the answer for question 1390 (August 15, 2008), so I don’t know what changed on this response. Nothing looks new in this information, so maybe there was just a correction of a typographical error.

The new answer to question 1435 makes a one-word change. The answer now reads “ACG refers to any quality [emphasis added] or concentration of a chemical of interest”; the previous version used the word ‘quantity’ instead of quality. Obviously ‘a commercial grade’ has nothing to do with the amount of the material involved; it describes some characteristic that makes the product salable in commerce.

Sunday, March 28, 2010

DHS CSAT FAQ Page Update – 03-28-10

This last week DHS updated the responses to three existing Frequently Asked Questions (FAQ) on their extensive FAQ page. The three questions were: 1460: How do I calculate the Total On-site Quantity (TOQ) of COI in a mixture? 1557: What should I do if I think my facility was incorrectly determined to be high-risk or received an incorrect preliminary risk-based tier determination? 1575: Can a program other than RMP*Comp be used to calculate Distance of Concern? None of the answer changes were significant from a regulatory point of view. Two questions (1460 and 1575) had URL’s corrected to link to the CSAT Top-Screen User’s Manual; the previous answer had separate typographical errors in the listed URL’s. The third question updates the official title for Mr. Todd M. Keil to ‘Assistant Secretary for Infrastructure Protection’; the previous response showed the title as ‘Assistant Secretary (Acting) for Infrastructure Protection’. This points out the importance of feed back. Small, seemingly unimportant errors do creep into any document as complex as this. If anyone in the community finds an error, particularly inactive links to documents, you need to contact the Help Desk (866-323-2957, Monday-Friday 7:00 a.m. – 7:00 p.m., Eastern Time) so that they can correct the error.

Saturday, March 6, 2010

DHS CSAT FAQ Page Update 03-05-10

DHS updated one of the Frequently Asked Questions (FAQ) on their lengthy and comprehensive Chemical Security Assessment Tool FAQ page. Normally these changes update previous answers with new data or add questions (and their answers) that have been addressed to the Help Desk. This week’s change is slightly different; it simply corrects a misspelled word and an obvious typo in the question itself (Question 1454). With over 1500 questions/answers the presence of this type of error is inevitable. I am glad to see that the people running the Help Desk are making the effort to see that these minor errors are addressed. If things like this are being caught, it is unlikely that more serious errors in the answers remain on the page. This is an admirable level of quality control.
 
/* Use this with templates/template-twocol.html */