Last week, I mentioned on my social media posts an article on NYTimes.com about a bomb that had been found at a chemical plant in Peoria, IL. It had been neutralized by authorities, and the investigation was ongoing. What with the other goings on that weekend, the story did not get much of a play nationally. Yesterday, it was announced (see here and here) that a plant employee had been charged with making the bomb threat and electronically communicating that threat. No details are (or probably will be) available on the size or sophistication of the device.
What Could Have Happened
First off, there is a reason that DHS has focused their bombing prevention activities at chemical plants (see my post here for example) on vehicle-borne improvised-explosive devices (VBIED). Chemical plants are robustly constructed. An unsophisticated bomber is going to need a large explosive device to be sure of a catastrophic effect, and terrorist want the most catastrophic effect that they can get.
Having said that, using a sophisticated device the size of a grade school backpack, properly placed at a strategic point on a large ethanol storage tank, you could easily cause a large hole in the tank structure that would lead to an uncontrollable discharge of the contents of the tank. Even if you did not get ignition at the point of detonation (not guaranteed no matter what Hollywood says), the fumes released from a large pool of discharged ethanol could very easily find a source of ignition some distance from the tank. The fume-flames would likely get back (flash back) to the pool of ethanol in the containment area, and the resulting pool fire could cause problems at other storage tanks. Foam firefighting techniques are well suited to addressing those types of pool fires. Many larger chemical facilities have in-house teams specifically trained and equipped to fight pool fires.
A less sophisticated device, or a more poorly placed device, would be unlikely to cause such a large hole to be made in the storage tank. What would be more likely would-be smaller holes from pieces of the device, and there could possibly even be no holes left in the tank. The smaller holes would increase the time to form a large flammable cloud and provide firefighting teams with more time to take preventive action.
In the case of any detonation, before the facility would be able to restart operations, it would need to conduct detailed inspections of wiring, piping, and supporting infrastructure in the affected area. The overpressure wave from the blast would be expected to loosen fitting and misalign piping and seals. Any fire in the area would require even more detailed engineering inspections to detect heat weakening of metals and damage to wiring and seals. Nearby storage tanks, particularly atmospheric tanks, would need to be checked for contamination from fumes, soot, and firefighting water and foam.
No comments:
Post a Comment