Showing posts with label Trustwave. Show all posts
Showing posts with label Trustwave. Show all posts

Sunday, December 13, 2020

Public ICS Disclosures – Week of 12-5-20, Part II

This week we have nine disclosures for products from Schneider. We also have eight vendor updates for products from Siemens (5) and Schneider (3). Finally, we have two researcher reports about vulnerabilities in products from Schneider.

Schneider Advisories

Schneider published an advisory describing a write-what-where condition vulnerability in their EcoStruxure™ Control Expert. The vulnerability was reported by Jared Rittle of Cisco Talos; the report contains proof-of-concept code. Schneider provides generic workarounds pending development of remediation measures.

 

Schneider published an advisory describing an insufficiently protected credentials vulnerability in their EcoStruxure Geo SCADA Expert. The vulnerability is being self-reported. Schneider has updates available that mitigate the vulnerability.

 

Schneider published an advisory describing two vulnerabilities in their Web Server on Modicon M340 communication modules. The vulnerabilities were reported by DongJian Security Lab and the Russian BDU FSTEC (report here). Schneider has new firmware versions that mitigate the vulnerabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The two reported vulnerabilities are:

• Forced browsing - CVE-2020-7541, and

• Improper check for unusual or exceptional conditions - CVE-2020-7539

 

Schneider published an advisory describing a missing authentication for critical function vulnerability in their Web Server on Modicon M340 communications modules. The vulnerability was reported by DongJian Security Lab. Schneider has new firmware versions that mitigate the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

 

Schneider published an advisory describing a path traversal vulnerability on the Web Server on Modicon M340 communications modules. The vulnerability was reported by Zheng Qiang. Schneider has new firmware versions that mitigate the vulnerability. There is no indication that the researcher have been provided an opportunity to verify the efficacy of the fix.

 

Schneider published an advisory describing an improper check for unusual or exceptional conditions vulnerability in their Web Server on Modicon M340 communications modules. The vulnerability is being self-reported.

 

Schneider published an advisory describing an improper check for unusual or exceptional conditions vulnerability in their Modicon M340 CPU’s. The vulnerability was reported by the VAPT Team from C3i IITK, India. Schneider has new firmware versions that mitigate the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

 

Schneider published an advisory describing three separate improper check for unusual or exceptional conditions vulnerabilities in their Modicon M580 controllers. The vulnerabilities were reported by Gao Jian of NSFOCUS, Daniel Lubel of OTORIO, Armis Security, Victor Fidalgo Villar of INCIBE-CERT, and Gideon Guo. Schneider has firmware updates that mitigate the vulnerabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

 

Schneider published an advisory describing an improper restriction of operations within the bounds of a memory buffer vulnerability in their M258 Logic Controllers and SoMachine/SoMachine Motion software. The vulnerability was reported by Kai Feng. Schneider has new versions that mitigate the vulnerability. There is no indication that Kai has been provided an opportunity to verify the efficacy of the fix.

Siemens Updates

Siemens published an update for their SegmentSmack advisory that was originally published on April 14th, 2020 and most recently updated on September 8th, 2020. The new information include updating information regarding successor products for SIMATIC RF180C and RF182C.

NOTE: NCCIC-ICS updated their advisory for this vulnerability back in September but has not updated for this Siemens update.

 

Siemens published an update for their GNU/Linux subsystem advisory that was originally published in 2018 and most recently updated on November 10th, 2020. The new information includes adding the following new vulnerabilities:

• CVE-2020-25284,

• CVE-2020-25668,

• CVE-2020-25705,

• CVE-2020-27618, and

• CVE-2020-27777

 

Siemens published an update for their Industrial Products advisory that was originally published on December 10th, 2019 and most recently updated on September 8th, 2020. The new information includes updating d information regarding successor products for SIMATIC RF182C and RFID 181EIP.

NOTE: NCCIC-ICS last updated their advisory for this product back in August.

 

Siemens published an update for their advisory that was originally published on September 9th, 2020 and most recently updated on October 13th, 2020. The new information includes adding patch links for:

• SIMATIC HMI Basic (2nd generation),

• Comfort (including SIPLUS variants), and

• Mobile Panels

NOTE: NCCIC-ICS published their advisory for these vulnerabilities back in September but has not updated it since.

 

Siemens published an update for their ZombieLoad advisory that was originally published on July 9th, 2019 and most recently updated on March 10th, 2020. The new information includes:

• Correcting mitigations for SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP and

• Providing updates for SIMATIC S7-1500 CPU 1518(F)-4 PN/DP MFP

Schneider Updates

Schneider published an update for their Ripple20 advisory that was originally published on June 23, 2020 and most recently updated on November 10th, 2020. The new information includes adding remediation for:

• SCADAPack 32 RTU,

• XUPH001 OsSense communication module,

• XGCS850C201 OsiSense RFID compact smart antenna,

• ATV340E Altivar Machine Drives,

• ATV630/650/660/680/6A0/6B0 Altivar Process Drives,

• ATV930/950/960/980/9A0/9B0 Altivar Process Drives,

• VW3A3720, VW3A3721 Altivar Process Communication Modules,

• ACE850 Sepam communication interface,

• PowerLogic EGX300 Ethernet Gateway,

• PowerLogic EGX100 Ethernet Gateway, and

• Acti9 Smartlink IP

 

Schneider published an update for their CodeMeter advisory that was originally published on October 13th, 2020. The new information includes reporting that the CodeMeter V7.10a fix qualification is confirmed for EcoStruxure Machine SCADA Expert.

 

Schneider published an update for their Modicon controllers advisory that was originally published on May 14th, 2019 and most recently updated on October 18th, 2020. The new information includes adding a fix for additional attack scenario is available on M340 V3.30 for CVE-2018-7857.

Schneider Reports

Claroty published a report discussing the Modicon M221 PLC vulnerabilities reported Tuesday by Schneider.

Trustwave published a report discussing one of the Modicon M221 PLC vulnerabilities reported Tuesday by Schneider. This report contains proof-of-concept code for the one-way hash vulnerability.

Tuesday, December 8, 2020

11 Advisories Published – 12-8-20

Today the CISA NCCIC-ICS published 10 control system security advisories for products from Siemens (6), Schneider (2), Mitsubishi, and multiple vendors. They also published a medical device security advisory for products from GE Healthcare.

NOTE: NCCIC-ICS also published 13 updates (according to an email I received from CISA) for previously published advisories. Interestingly the ICS Archive Information Products web page only currently lists 5 updates. In any case, I will address these updates tomorrow.

LOGO! Advisory

This advisory describes eight vulnerabilities in the Siemens LOGO! 8 BM products. The vulnerabilities were reported by Thomas Meesters from cirosec GmbH, as well as Tobias Gebhardt, and Max Bäumler. Siemens has new versions that mitigate the vulnerability. There is no  indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The eight reported vulnerabilities are:

• Missing authentication for critical function - CVE-2020-25228,

• Use of hard-coded cryptographic key (4) - CVE-2020-25229, CVE-2020-25231, CVE-2020-25233, and CVE-2020-25234,

• Use of a broken or risky cryptographic algorithm (2) - CVE-2020-25230, and CVE-2020-25232, and

• Insufficiently protected credentials - CVE-2020-25235

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit these vulnerabilities to allow an attacker the ability to make configuration and password changes, capture device keys, access confidential information, and gain full control of the device.

SIMATIC Advisory

This advisory describes an uncaught exception vulnerability in the Siemens SIMATIC Controller Web Servers. The vulnerability is self-reported. Siemens has updates that mitigate the vulnerability.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit this vulnerability to allow an attacker to cause a denial-of-service condition.

TightVNC Advisory

This advisory describes four vulnerabilities in the Siemens SIMATIC products using TightVNC (v1.X), a remote-control software package. TightVNC is an open-source third-party product. The vulnerability was reported by Kaspersky Labs. Siemens has updates for some of the affected products. There is no indication that the researchers have been provided with an opportunity to verify the efficacy of the fix.

The four reported vulnerabilities are:

• Heap-based buffer overflow (2) - CVE-2019-15678, and CVE-2019-15679,

• Null pointer dereference - CVE-2019-15680, and

• Classic buffer overflow - CVE-2019-8287

NOTE: The Kaspersky report identifies vulnerabilities in three other implementations of the VNC protocol; LibVNC, TurboVNC and UltraVNC. Other products (other vendors) with remote access capabilities are going to be affected by these issues. This is going to be a fun one.

SICAM Advisory

This advisory describes a protection mechanism failure vulnerability in the Siemens SICAM A8000 Remote Terminal Unit Series. The vulnerability was reported by Sam Hamra from KTH Royal Institute of Technology. Siemens has a version that mitigates the vulnerability. There is no indication that Hamra has been provided an opportunity to verify the efficacy of the fix.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit this vulnerability to allow an attacker to gain unauthorized read or write access to network traffic to or from the device.

XHQ Advisory

This advisory describes seven vulnerabilities in the Siemens XHQ Operations Intelligence. The vulnerabilities are self-reported. Siemens has a new version that mitigates the vulnerabilities.

The seven reported vulnerabilities are:

• Exposure of sensitive information to an unauthorized actor - CVE-2019-19283,

• Cross-site scripting - CVE-2019-19284, and CVE-2019-19288,

• Basic XSS - CVE-2019-19285,

• SQL injection - CVE-2019-19286,

• Relative path traversal - CVE-2019-19287, and

• Cross-site request forgery - CVE-2019-19289

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit these vulnerabilities to allow an attacker to read sensitive information, modify web content, and perform cross-site scripting and cross-site request forgery on unsuspecting users.

Embedded TCP/IP Stack Advisory

This advisory describes an integer overflow vulnerability in the Siemens SENTRON PAC3200, SENTRON PAC4200, SIRIUS 3RW5 products. This is the third-party Amensia33 vulnerability. The vulnerability was reported by Daniel dos Santos, Stanislav Dashevskyi, Jos Wetzels, and Amine Amri of Forescout Research Labs. Siemens has upgrades available for some of the affected products.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit the vulnerability to ause a denial-of-service condition.

Modicon Advisory

This advisory describes five vulnerabilities in the Schneider Modicon M221 Programmable Logic Controller. The vulnerabilities were reported by Yehuda Anikster and Rei Henigman of Claroty, and Seok Min Lim and Bryon Kaan of Trustwave. Schneider has provided generic workarounds to mitigate the vulnerabilities.

The five reported vulnerabilities are:

• Inadequate encryption strength - CVE-2020-7565,

• Small space of random values - CVE-2020-7566,

• Missing encryption of sensitive data - CVE-2020-7567,

• Exposure of sensitive information - CVE-2020-7568, and

• Use of a one-way hash with a predictable salt - CVE-2020-28214

NCCIC-ICS reports that an uncharacterized attacker on an adjacent network could exploit the vulnerabilities to allow an attacker to take control over the PLC and gain unauthorized access, which could result in exposure of sensitive information.

NOTE 1: I briefly reported on the original Schneider advisory back in November. This NCCIC-ICS advisory is based upon an updated version of that advisory published today that adds the last vulnerability reported above.

NOTE 2: The Trustwave report includes proof-of concept exploit code.

Easergy Advisory

This advisory describes five vulnerabilities in the Schneider Easergy T300. The vulnerabilities were reported by Evgeniy Druzhinin and IIya Karpov of Rostelecom-Solar. Schneider has a new version that mitigates the vulnerabilities. There is no indication that the researchers were provided an opportunity to verify the efficacy of the fix.

The five reported vulnerabilities are:

• Missing authentication for critical function - CVE-2020-7561,

• Missing authorization - CVE-2020-28215,

• Missing encryption of sensitive data (2) - CVE-2020-28216, and CVE-2020-28217, and

• Improper restriction of rendered UI layers or frames - CVE-2020-28218

NCCIC-ICS reports that an uncharacterized attacker could remotely exploit the vulnerabilities to obtain unauthorized access to the internal product LAN, which could result in exposure of sensitive information, denial of service, and remote code execution when access to a resource from an attacker is not restricted or incorrectly restricted.

NOTE: I briefly reported on the original Schneider advisory back in November. This NCCIC-ICS advisory is based upon an updated version of that advisory published today that adds the last four vulnerabilities reported above.

NOTE: Schneider also published nine new advisories and three additional updates today. I suspect that I will be addressing these this weekend.

Mitsubishi Advisory

This advisory describes an out-of-bounds read vulnerability in the Mitsubishi GOT and Tension Controller. The vulnerability is self-reported. Mitsubishi is providing generic mitigation measures while it continues to work on a fixed version of the products.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit the vulnerability to cause deterioration of communication performance or cause a denial-of-service condition of the TCP communication functions of the products.

NOTE: I briefly reported on this vulnerability last weekend.

Embedded TCP/IP Stacks Advisory

This advisory discusses the Amnesia33 vulnerabilities that were briefly addressed in the Siemens TCP/IP advisory above. This separate advisory lists 33 distinct vulnerabilities (thus the ‘33’ in the title of the Forescout report) found in the different TCP/IP stack implementations. It also provides a list of vendor advisories for products affected by these vulnerabilities:

• Devolo

• EMU Electronic AG

• FEIG

• Genetec

• Harting

• Hensoldt

• Microchip

• Nanotec

• NT-Ware

• Tagmaster

• Siemens

• Uniflow

• Yanzi Networks

It is interesting that NCCIC-ICS published a separate advisory for the Siemens version of the vulnerability.

GE Advisory

This advisory describes two vulnerabilities in the GE Imaging and Ultrasound Products. The vulnerabilities were reported by Lior Bar Yosef and Elad Luz of CyberMDX. GE has publicly provided generic workarounds to mitigate the vulnerabilities.

The two reported vulnerabilities are:

• Unprotected transport of credentials - CVE-2020-25175, and

• Exposure of sensitive system information to an unauthorized control sphere - CVE-2020-25179

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit these vulnerabilities to allow an attacker to gain access to affected devices in a way that is comparable with GE (remote) service user privileges. A successful exploitation could expose sensitive data such as a limited set of patient health information (PHI) or could allow the attacker to run arbitrary code, which might impact the availability of the system and allow manipulation of PHI.


Saturday, November 21, 2020

Public ICS Disclosures – Week of 11-14-20

This week we have six vendor disclosures from Beckhoff, ENDRESS+HAUSER (2), GE Grid (2), and Medtronic. We have one Ripple20 advisory update for products from Eaton. We also have a researcher report on vulnerabilities in products from Schneider. Finally, we have reports of exploits for products from Rockwell and the Netlogon vulnerability in Microsoft products.

Beckhoff Advisory

CERT-VDE published an advisory describing an incorrect default permissions vulnerability in the Beckhoff TwinCAT XAR product. The vulnerability was reported by Ayushman Dutta. Beckhoff has provided installation instructions to mitigate the vulnerability. There is no indication that Dutta has been provided an opportunity to verify the efficacy of the fix.

ENDRESS+HAUSER Advisories

CERT-VDE published an advisory describing an exposure of sensitive information to an unauthorized actor vulnerability in the ENDRESS+HAUSER Ecograph T products. The vulnerability was reported by Maxim Rupp. ENDRESS+HAUSER has provided generic workarounds to mitigate the vulnerability.

CERT-VDE published an advisory describing an improper privilege management vulnerability in the ENDRESS+HAUSER Ecograph T products. The vulnerability was reported by Maxim Rupp. ENDRESS+HAUSER has provided generic workarounds to mitigate the vulnerability.

GE Advisories

GE published an advisory for their Reason RT430/RT434. The advisory is only available to registered customers.

GE published an advisory for their Reason RT431. The advisory is only available to registered customers.

Medtronic Advisory

Medtronic published an advisory discussing the TiYunZong vulnerabilities found in the CT900 Samsung Android tablets used to run their Clinical Programmer Applications. A Chrome browser update is available to mitigate the vulnerabilities.

NOTE: I wonder what other vendors using Android products for access devices could be susceptible to these vulnerabilities?

Eaton Update

Eaton published an update for their Ripple20 advisory that was originally published on June 23rd, 2020 and most recently updated on October 5th, 2020. The new information includes adding the Uninterrupted Power Supply (UPSs) with ModbusMS card to the list of affected products.

Schneider Report

Trustwave published a report describing their research into vulnerabilities in the Schneider EcoStruxure Machine Expert and M221 PLC. The vulnerabilities were reported by Schneider on October 10th, 2020. The report includes proof-of-concept code.

Rockwell Exploit

The Flashback team published a Metasploit module for vulnerabilities in the Rockwell FactoryTalk View SE SCADA product. These vulnerabilities were reported by CISA NCCIC-ICS on June 18th, 2020.

Netlogon Exploit

West Shepherd published a proof-of-concept exploit for the Netlogon vulnerabilities reported by Microsoft.

NOTE: I have not seen this vulnerability reported in control system products, but it has been reported by medical device manufacturers (see for example BD).

Saturday, November 14, 2020

Public ICS Disclosures – Week of 11-07-20

This week we have eight vendor disclosures for products from Schneider (7) and Thales Group. We also have nine updates for advisories for products from Schneider (5), Siemens (2), Carestream and Rockwell.

Schneider Advisories

Schneider published an advisory describing three vulnerabilities in the web servers of their Modicon M340, Modicon Quantum and Modicon Premium Legacy products. The vulnerabilities were reported (here and here) by Kai Wang of Fortinet's FortiGuard Labs. Schneider is working on mitigation measures for those affected products that are not end-of-life.

The three reported vulnerabilities are:

• Out-of-bounds read - CVE-2020-7562,

• Out-of-bounds write - CVE-2020-7563, and

• Classic buffer overflow - CVE-2020-7564

 

Schneider published an advisory describing an improper privilege management vulnerability in their EcoStruxure™ Operator Terminal Expert runtime (Vijeo XD). The vulnerability was reported by Lasse Trolle Borup of Danish Cyber Defence. Schneider has a service pack that mitigates the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

 

Schneider published an advisory describing nine vulnerabilities in their Interactive Graphical SCADA System (IGSS) product. The vulnerabilities were reported by kimiya via the Zero Day Initiative. Schneider has a new version that mitigates the vulnerabilities. There is no indication that kimiya has been provided an opportunity to verify the efficacy of the fix.

The nine reported vulnerabilities are:

• Improper restriction of operations within the bounds of a memory buffer (4) – CVE-2020-7550, CVE-2020-7551, CVE-2020-7552, and CVE-2020-7554,

• Out-of-bounds write (4) - CVE-2020-7553, CVE-2020-7555, CVE-2020-7556, and CVE-2020-7558, and

• Out-of-bounds read - CVE-2020-7557

 

Schneider published an advisory describing seven vulnerabilities in their EcoStruxure Building Operation (EBO) product offerings. The vulnerabilities were reported by Luis Vázquez, Francisco Palma, and Diego León of Zerolynx, and Alessandro Bosco, Luca Di Giuseppe, Alessandro Sabetta, Massimiliano Brolli of TIM Security Red Team Research. Schneider has a version that mitigates the vulenrabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The seven reported vulnerabilities are:

• Unrestricted upload of file with dangerous type - CVE-2020-7569,

• Cross-site scripting stored - CVE-2020-7570,

• Cross-site scripting reflected - CVE-2020-7571,

• Improper restriction of XML external entity reference - CVE-2020-7572,

• Improper access control - CVE-2020-7573,

• Windows unquoted search path - CVE-2020-28209, and

• Cross-site scripting - CVE-2020-28210

 

Schneider published an advisory describing four vulnerabilities in their Modicon M221 product. The vulnerabilities were reported by Yehuda Anikster and Rei Henigman of Claroty, and Seok Min Lim and Bryon Kaan of Trustwave (here). Schneider provides generic work arounds to mitigate the vulnerabilities.

The four reported vulnerabilities are:

• Inadequate encryption strength - CVE-2020-7565,

• Small space of random values - CVE-2020-7566,

• Missing encryption of sensitive data - CVE-2020-7567, and

• Exposure of sensitive data to an unauthorized actor - CVE-2020-7568

NOTE: The Trustwave report contains proof-of-concept code.

 

Schneider published an advisory describing an improper access control vulnerability in their Easergy T300 remote terminal unit. The vulnerability was reported by Evgeniy Druzhinin and Ilya Karpov of Rostelecom-Solar. Schneider has a new version that mitigates the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.


Schneider published an advisory discussing the Drovorub malware and its impact on their Q Data Radio and J Data Radio devices. Schneider is providing generic workarounds pending further work on mitigating the vulnerabilities.

Thales Advisory

Thales Group published an advisory for their Sentinel RMS License Manager. The advisory is only available to registered customers. We should expect to see various vendors incorporating the fix for this in their affected products.

Schneider Updates

Schneider published an update for their Ripple20 advisory. The new information includes adding mitigation measures for:

• eIFE Ethernet Interface for MasterPact MTZ drawout circuit breakers,

• IFE Ethernet Interface for ComPact, PowerPact, and MasterPact circuit breakers, and

• IFE Gateway

 

Schneider published an update for their EcoStruxure advisory that was originally published on May 12th, 2020 and most recently updated on June 9th, 2020. The new information includes adding mitigation measures for CVE-2020-7495 & CVE-2020-7497.

 

Schneider published an update for their Modicon M218/M241/M251/M258 Logic Controllers advisory that was originally published on April 14th, 2020. The new information includes adding mitigation measures for M258.

 

Schneider published an update for their Modicon Controllers advisory that was originally published on March 20th, 2020. The new information includes adding mitigation information for CVE-2020-7475.

 

Schneider published an update for their Modicon M580 controller advisory that was originally published on October 8th, 2019. The new information includes adding mitigation information for CVE-2019-6848 and CVE-2019-6849.

Siemens Updates

Siemens published an update for their CodeMeter advisory. The new information includes adding SICAM 230 to the list of affected versions including mitigation measures.


Siemens published an update for their GNU/Linux advisory that was originally published in 2018 and most recently updated on October 13th, 2020. The new information includes adding:

• CVE-2020-10769,

• CVE-2020-14314,

• CVE-2020-25211, and

• CVE-2020-25641

Carestream Update

Carestream published an update [.PDF download link] for their Bad Neighbor advisory. The new information includes lists of affected and unaffected products.

Rockwell Update

Rockwell published an update for their Urgent/11 advisory. The new information includes mitigation measures for ControlLogix 5580 and CompactLogix products.


Saturday, April 18, 2020

Public ICS Disclosures – Week of 04-11-20


This week we have five vendor disclosures for products from Schneider (4) and OPC Foundation. We also have nine updated advisories for products from Schneider (4) and Siemens (5).

Schneider Advisories


Schneider published an advisory describing an injection vulnerability in their Modicon M100/M200/M221 controllers, SoMachine Basic and EcoStruxure Machine Expert - Basic products. The vulnerability was reported by Seok Min Lim and Johnny Pan of Trustwave. Schneider has updated software and firmware that mitigates the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.


Schneider published an advisory describing two vulnerabilities in their Modicon M218/M241/M251/M258 Logic Controllers, SoMachine & SoMachine Motion, and EcoStruxure Machine Expert products. The vulnerabilities were reported by Rongkuan Ma, Shunkai Zhu and Peng Cheng of 307Lab. Schneider has new versions to mitigate the vulnerabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The two reported vulnerabilities are:

• Insufficient verification of data authenticity - CVE-2020-7487; and
• Clear-text transmission of sensitive data - CVE-2020-7488



Schneider published an advisory describing an untrusted search path vulnerability in their Vijeo Designer and Vijeo Designer Basic Software products. The vulnerability was reported by Yongjun Liu of nsfocus. Schneider has a new version that mitigates the vulnerability. There is no indication that Yongjun has been provided an opportunity to verify the efficacy of the fix.


Schneider published an advisory describing four vulnerabilities in their legacy Triconex product. These vulnerabilities are self-reported. Schneider reports that newer versions corrected the vulnerabilities.

The four reported vulnerabilities are:

• Password vulnerability (2) - CVE-2020-7483 and CVE-2020-7484;
• Improper access - CVE-2020-7485; and
• Denial of service - CVE-2020-7486

OPC Foundation Advisory


OPC published an advisory describing an malformed message vulnerability in their UA .NET Standard Stack. The vulnerability was reported by Steven Seeley (mr_me) and Chris Anastasio (muffin) via the Zero Day Initiative. OPC has updates available that mitigate the vulnerability. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

Schneider Updates


Schneider has published an update for their Urgent/11 advisory that was originally published on August 2nd, 2019 and most recently updated on March 11th, 2020. The new information includes updated mitigation information for:

• ION7400 MID; and
• PM8000 MID


Schneider has published an update for their Modicon Controllers advisory that was originally published on November 12th, 2019. The new information includes the addition of a new hard-coded credentials vulnerability - CVE-2019-6859.


Schneider has published an update for their Andover Continuum advisory that was originally published on March 10th, 2020. The updated information includes an explanation that the code injection vulnerability is a third-party MS-XML library vulnerability.


Schneider has published an update for their Modicon Controllers advisory that was originally published on December 10th, 2019. The updated information includes:

• Adding Modicon M340 and M580 to affected product list;
• Adding a hotfix link and adding further details to the mitigation measures;
• Adding updated firmware links; and
• Adding Enrique Murias Fernández of Tecdesoft Automation to the acknowledgements.

Siemens Updates


Siemens published an update for an advisory for Intel CPUs that was originally published on February 11th, 2020 and most recently updated on March 10th, 2020. The new information includes updated version information and mitigation links for SIMATIC ET 200SP Open Controller CPU 1515SP PC2.


Siemens published an update for an advisory for Industrial Products that was originally published on January 14th, 2020. The new information includes explicitly mentioning old versions of SIMATIC NET.


Siemens published an update for their GNU/Linux subsystem vulnerabilities advisory that was originally published on November 27th, 2018 and most recently updated on February 11th, 2020. The new information includes adding the following new vulnerabilities:

• CVE-2015-5895;
• CVE-2019-19447;
• CVE-2019-19603;
• CVE-2019-19645,
• CVE-2019-19646;
• CVE-2019-19880;
• CVE-2019-19923;
• CVE-2019-19924;
• CVE-2019-19925;
• CVE-2019-19926;
• CVE-2019-19959;
• CVE-2019-20218;
• CVE-2020-8428;
• CVE-2020-8492;
• CVE-2020-9327;
• CVE-2020-10029; and
• CVE-2020-10942


Siemens published an update for their SIMATIC advisory that was originally published on July 30th, 2012. The new information includes adding SIPLUS devices to the list of affected devices.

NOTE: ICS-CERT published advisory ICSA-12-212-02 covering this vulnerability, but has not yet updated (and may not update) that advisory.


Siemens published an update for their SIMATIC advisory that was originally published on July 30th, 2012. The new information includes adding SIPLUS devices to the list of affected devices.

NOTE: This advisory was lumped into the ICS-CERT advisory described above.

 
/* Use this with templates/template-twocol.html */