Wednesday, October 14, 2020

4 Updates Published – 10-13-20

Yesterday the CISA NCCIC-ICS updated four control system security advisories for products from Siemens.

SCALANCE Update

This update provides additional information on an advisory that was originally published on November 28th, 2017 and most recently updated on May 10th, 2018. The new information includes:

• Added RUGGEDCOM RM1224 to the list of affected products,

• Updated remediation link for SCALANCE W1750D,

• Updated CVSS scores, and

• Added CWE IDs.

Industrial Products Update #1

This update provides additional information on an advisory that was originally published on September 10th, 2019 and most recently updated on September 8th, 2020. The new information includes mitigation links for SIMATIC MV500 and SCALANCE W1750D.

Industrial Products Update #2

This update provides additional information on an advisory that was originally published on September 8th, 2020. The new information includes:

• Removing the following from the list of affected products:

◦ SINUMERIK 840D sl (NCU730.3B),

◦ SINUMERIK 828D (PPU.4 /PPU1740), and

◦ SINUMERIK ONE (NCU1750 / NCU1760).

• Adding mitigation measures for:

◦ SIMATIC IPC627E,

◦ SIMATIC IPC647E,

◦ SIMATIC IPC677E, and

◦ SIMATIC IPC847E

SIMATIC Update

This update provides additional information on an advisory that was originally published on September 8th, 2020. The new information includes adding SIMATIC WinAC RTX (F) 2010 and SINUMERIK 840D sl to the list of affected products.

Other Siemens Updates

Yesterday Siemens published updates for three additional advisories. If, not covered by NCCIC-ICS before then (and I do not expect that they will) I will discuss them this weekend.

ISCD Updates 2 FAQ Responses – 10-13-20

Yesterday the CISA Infrastructure Security Compliance Division (ISCD) updated the responses to two frequently asked questions (FAQs) on the Chemical Facility Anti-Terrorism Standards (CFATS) Knowledge Center web page.

The following FAQ responses were revised:

FAQ #1770 How will the Cybersecurity and Infrastructure Security Agency (CISA) protect the data it collects? Can Chemical-terrorism Vulnerability Information (CVI) be released under the Freedom of Information Act (FOIA)?

FAQ #1784 Does a facility have to count theft/diversion chemicals of interest (COI) in transportation packaging towards the screening threshold quantity (STQ) if the COI is on or attached to motive power, to include an overnight stay?

NOTE: The links provided for the FAQs in this post were copied from the CFATS Knowledge Center but may not work when followed from your machine. This is an artifact of that web site. If the links do not take you to the referenced FAQ you will have to use the ‘Advanced Search’ function on the page to link to the FAQ or download the ‘All FAQs’ document at the bottom of the ‘Advanced Search’ page.

The following changes were made in the referenced responses:

#1770 Complete rewrite of FAQ and response, but no change in policy or procedure.

#1784 Provides links to regulation and Federal Register cites.

For reference purposes, here is what the language of FAQ 1770 and its response read before yesterday’s changes:

Question: Can Chemical-terrorism Vulnerability Information (CVI) be released under the Freedom of Information Act (FOIA)? 

Answer: No. Notwithstanding the Freedom of Information Act or FOIA (5 U.S.C. 552), the Privacy Act (5 U.S.C.552a), and other laws, in accordance with the Homeland Security Act as amended by the Protecting and Securing Chemical Facilities from Terrorist Attacks Act of 2014, Public Law 113-254, and 6 C.F.R. § 27.400(g), records containing CVI are not available for public inspection or copying, and the Department does not release such records to persons without a need to know.

Further, as provided in 6 C.F.R. § 27.405, no law, regulation, or administrative action of a State or political subdivision thereof shall have any effect if such law or regulation conflicts with the Chemical Facility Anti-Terrorism Standards (CFATS). Requests for CVI under State or local FOIA or open records laws should be referred to the DHS National Protection and Programs Directorate (NPPD) Information Management and Disclosure Office, NPPD.FOIA@hq.dhs.gov.

If a record contains both information that may not be disclosed under Public Law 113-254 and information that may be disclosed, the latter information may be provided in response to a FOIA request, provided that the record is not otherwise exempt from disclosure under FOIA and that it is practical to redact the protected CVI from the requested record.

Note: Please refer to the “Safeguarding Information Designated as Chemical-terrorism Vulnerability Information (CVI) Handbook” for more information. The Handbook is available at https://www.dhs.gov/publication/safeguardinginformation-cvi-manual.

Tuesday, October 13, 2020

6 Advisories Published – 10-13-20

Today the CISA NCCIC-ICS published six control system security advisories for products from Siemens (2), Fieldcomm Group, Flexera, LCDS, and Moxa.

SIPORT Advisory

This advisory describes a use of client-side authentication vulnerability in the Siemens SIPORT MP access control system. The vulnerability is self-reported. Siemens has a new version that mitigates the vulnerability.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit this vulnerability to allow an authenticated attacker to impersonate other users of the system and perform (potentially administrative) actions on behalf of those users if the single sign-on feature (“Allow logon without password”) is enabled.

Desigo Advisory

This advisory describes three vulnerabilities in the Siemens Desigo Insight product. The vulnerabilities were reported by Davide De Rubeis, Damiano Proietti, Matteo Brutti, Stefano Scipioni, and Massimiliano Brolli from TIM Security Red Team Research. Siemens has a ‘hotfix’ available to mitigate the vulnerabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The three reported vulnerabilities are:

• SQL injection - CVE-2020-15792,

• Improper restriction of rendered UI layers or frames - CVE-2020-15793, and

• Exposure of sensitive information to an unauthorized actor - CVE-2020-15794

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit these vulnerabilities to allow an attacker to retrieve or modify data and gain access to sensitive information.

Fieldcomm Group Advisory

This advisory describes a stack-based buffer overflow vulnerability in the Fieldcom HARP-IP Developer kit. The vulnerability was reported by Reid Wightman from Dragos, Inc. Fieldcomm has a new version for one of the affected products that mitigates the vulnerability. There is no indication that Wightman has been provided an opportunity to verify the efficacy of the fix.

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit the vulnerability to  crash the device being accessed; a buffer overflow condition may allow remote code execution.

Flexera Advisory

This advisory describes an untrusted search path vulnerability in the Flexera InstallShield product. The vulnerability was reported by an anonymous researcher. Flexera will only provide mitigation measures and work arounds to registered owners.

NCCIC-ICS reports that a relatively low-skilled attacker with uncharacterized access could exploit the vulnerability to allow execution of a malicious DLL.

NOTE: This vulnerability was reported by Flexera in 2016, so why is NCCIC-ICS reporting this now? Both IBM (Tivoli Storage Manager) and Tenable (Nessus Network Monitor) have issued advisories covering this as a third-party vulnerability in 2016 and 2019 respectively. I suspect that there are other vendors that also use InstallShield that may be unaware of the vulnerability or may not have addressed it.

LCDS Advisory

This advisory describes an out-of-bounds read vulnerability in the LCDS LAquis SCADA. The vulnerability was reported by an anonymous researcher via the Zero Day Initiative. LCDS has a new version that mitigates the vulnerability.

NCCIC-ICS reports that a relatively low-skilled attacker with uncharacterized access could exploit this vulnerability to allow an attacker to execute code under the privileges of the application.

Moxa Advisory

This advisory describes six vulnerabilities in the Moxa NPort IAW5000A-I/O Series integrated serial device server. The vulnerabilities were reported by Evgeniy Druzhinin and Ilya Karpov of Rostelecom-Solar. Moxa has an updated firmware version that mitigates the vulnerabilities. There is no indication that the researchers have been provided an opportunity to verify the efficacy of the fix.

The six reported vulnerabilities are:

• Session fixation - CVE-2020-25198,

• Improper privilege management - CVE-2020-25194,

Weak password requirements - CVE-2020-25153,

• Cleartext transmission of sensitive information - CVE-2020-25190,

• Improper restriction of excessive authorization attempts - CVE-2020-25196, and

• Exposure of sensitive information to unauthorized actor - CVE-2020-25192

NCCIC-ICS reports that a relatively low-skilled attacker could remotely exploit these vulnerabilities to allow an attacker to gain access to and hijack a session; allow an attacker with user privileges to perform requests with administrative privileges; allow the use of weak passwords; allow credentials of third-party services to be transmitted in cleartext; allow the use of brute force to bypass authentication on an SSH/Telnet session; or allow access to sensitive information without proper authorization.

NOTE: I briefly described these vulnerabilities back in August. Moxa has updated their advisory to list the CVE numbers assigned by NCCIC-ICS.

Siemens Updates

NCCIC-ICS also published four Siemens updates today. I will cover them in a post tomorrow.

Sunday, October 11, 2020

ISCD Updates Monthly Statistics – September 2020

Sometime last week (CISA does not date page updates any longer so I cannot pin point it more accurately than that) CISA’s Infrastructure Security Compliance Division (ISCD) updated the information on their CFATS Monthly Statistics. This page provides information on activities conducted by the Chemical Security Inspectors and statistics on facilities covered under the Chemical Facility Anti-Terrorism Standards (CFATS) program.

CSI Activities

The table below shows the activities conducted by the CFATS Chemical Security Inspectors for the last four months. Since resuming CSI activities in June, ISCD has maintained a higher operational rate for its inspectors than it saw before the COVID-19 pandemic.

Inspection Data

Jun-20

Jul-20

Aug-20

Sep-20

Authorization Inspections

1

10

24

31

Compliance Inspections

35

76

107

131

Compliance Assistance

198

162

115

140

Compliance Audit

27

8

9

23

Total Activities

234

275

255

325

Compliance Audits were a reduced-contact activity developed by ISCD in response to the COVID-19 pandemic. It was first reported in June 2020.

Facility Status

The table below shows the status of current facilities covered under the CFATS program. We continue to see a long-term trend in the gradual loss of facilities in the program. Some of this is due to changes in inventory of DHS chemicals of interest (COI), but some of the loss may be due to the closure of chemical facilities.

Facility Status

Jun-20

Jul-20

Aug-20

Sep-20

Tiered

150

139

124

108

Authorized

130

141

147

159

Approved

3061

3057

3056

3053

Total

3341

3337

3327

3320

The number of new facilities coming into the program (as reflected by the ‘Tiered’ data) is at the lowest level we have seen since the introduction of CSAT 2.0 in 2016. Some of this probably reflects the reduced number of industry events where the ISCD CFATS outreach program is able to present information about the CFATS program. More likely, however, is that the outreach program has reached a level of information saturation where there are a rapidly decreasing number of potentially covered facilities that are not aware of their reporting responsibilities under the CFATS program.

At some point ISCD is going to have to aggressively start looking for individual facilities that have willfully ignored their legal responsibility to report the presence of COI inventories. Such investigations could start with obtaining data on where COI are shipped to, or received from, by currently covered facilities. ISCD may need additional Congressional authorization to require that facilities provide this information to ISCD.

Saturday, October 10, 2020

ISCD Updates 1 FAQ Response – 10-9-20

Yesterday the CISA Infrastructure Security Compliance Division (ISCD) updated the responses to one frequently asked question (FAQ) on the Chemical Facility Anti-Terrorism Standards (CFATS) Knowledge Center web page. None of the changes were substantive nor did they reflect policy changes.

The following FAQ response was revised:

FAQ #1785 How does the Cybersecurity and Infrastructure Security Agency (CISA) notify a facility of its tiering?

NOTE: The links provided for the FAQs in this post were copied from the CFATS Knowledge Center but may not work when followed from your machine. This is an artifact of that web site. If the links do not take you to the referenced FAQ you will have to use the ‘Advanced Search’ function on the page to link to the FAQ or download the ‘All FAQs’ document at the bottom of the ‘Advanced Search’ page.

The following changes were made in the referenced response:

#1785 Replace ‘DHS’ with ‘CISA’, added regulatory links and replaced URLs with links.

Public ICS Disclosures – Week of 10-03-20

This week we have one vendor disclosure from PEPPERL+FUCHS and one vendor update for products from 3S.

PEPPERL+FUCHS Advisory

CERT-VDE published an advisory describing five vulnerabilities in the PEPPERL+FUCHS Comtrol RocketLinx ethernet switches. The vulnerabilities were reported by T. Weber of SEC Consult Vulnerability Lab. PEPPERL+FUCHS has new firmware versions available that mitigate the vulnerabilities. There is no indication that Weber has been provided an opportunity to verify the efficacy of the fix.

The five reported vulnerabilities are:

• Unauthenticated device administration (2) - CVE-2020-12500 and CVE-2020-12502,

• Undocumented accounts - CVE-2020-12501,

• Multiple authenticated command injections - CVE-2020-12500, and

• Active TFTP-service - CVE-2020-12504

NOTE 1: The current version of this advisory on the CERT-VDE web page is marked as ‘Update A’, the original version was apparently published earlier in the week.

NOTE 2: SEC Consult reports that this is an OEM vulnerability which they do not name pending response to the vulnerability notification.

3S Update

3S published an update [.PDF download link] for their CodeMeter advisory that was originally published on September 16th, 2020 and most recently updated on September 24th, 2020. The new information includes more details about the coverage of the update for CODESYS v3.5.16.20.

Thursday, October 8, 2020

2 Advisories Published – 10-8-20

Today the CISA NCCIC-ICS published two control system security advisories for products from Mitsubishi and Johnson Controls.

Mitsubishi Advisory

This advisory describes an uncontrolled resource consumption vulnerability in the Mitsubishi MELSEC iQ-R Series modules. The vulnerability was reported by Yossi Reuven of SCADAfence. Mitsubishi plans to release a patch to mitigate the vulnerability. In the meantime, they have provided generic workarounds.

According to NCCIC-ICS a relatively low-skilled attacker could remotely exploit this vulnerability to result in a denial-of-service condition due to uncontrolled resource consumption.

NOTE: NCCIC-ICS did not provide a link to the Mitsubishi advisory.

Johnson Controls Advisory

This advisory describes an improper authorization vulnerability in the Johnson Controls American Dynamics victor Web Client. The vulnerability was reported by Joachim Kerschbaumer. Johnson Controls has a new version that mitigates the vulnerability. There is no indication that Kerschbaumer has been provided an opportunity to verify the efficacy of the fix.

NCCIC-ICS reports that a relatively low-skilled attacker with access to an adjacent network could exploit the vulnerability to allow a remote unauthenticated attacker to delete arbitrary files on the system or render the system unusable through a denial-of-service attack.

 
/* Use this with templates/template-twocol.html */